Monitor Controller Fabric - Cisco XR 1200 series Command Reference Manual

monitor controller fabric

monitor controller fabric
To monitor controller fabric counters in real time, use the monitor controller fabric command in EXEC
mode.
monitor controller fabric {plane-id| all}
Syntax Description
plane-id
all
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Use the monitor controller fabric command to display controller fabric counters. The display refreshes
every 2 seconds.
The interactive commands that are available during a controller fabric monitoring session are described in
this table.
Table 33: Interactive Commands Available for the monitor controller fabric Command
Command
c
f
t
q
s
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
362
Plane ID number of the fabric plane to be monitored. The range is 0 to 7.
Monitors all fabric planes.
Modification
This command was introduced.
Description
Resets controller fabric counters to 0.
Freezes the display screen, thereby suspending the
display of fresh counters.
Thaws the display screen, thereby resuming the
display of fresh counters.
Terminates the controller fabric monitoring session.
Enables you to jump to a nonsequential fabric plane.
You are prompted to enter the plane ID of the fabric
to be monitored.
Performance Management Commands
OL-24735-01