Reaction Operation - Cisco XR 1200 series Command Reference Manual

IP Service Level Agreement Commands

reaction operation

To configure certain actions that are based on events under the control of the IP SLA agent, use the reaction
operation command in IP SLA configuration mode.To remove the reaction so that no reaction occurs, use
the no form of this command.
reaction operation operation-id
no reaction operation operation-id
Syntax Description
operation-id
Command Default
No reaction is configured.
Command Modes
IP SLA configuration
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
monitor
Examples
The following example shows how to use the reaction operation command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 1
RP/0/0/CPU0:router(config-ipsla-react)#
Related Commands
Command
operation, on page 174
schedule operation, on page 215
OL-24735-01
Number of the IP SLA operation for the reactions to be configured. Range
is 1 to 2048.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
reaction operation
199