Cisco XR 1200 series Command Reference Manual page 272

tag (IP SLA)
Task ID
Task ID
monitor
Examples
The following example shows how to use the tag command in IP SLA UDP jitter configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)# tag ipsla
The following example shows how to use the tag command in IP SLA MPLS LSP monitor ping configuration
mode:
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)# tag mplslm-tag
Related Commands
Command
operation, on page 174
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
260
IP Service Level Agreement Commands
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
OL-24735-01