Table of Contents
Advertisement
IP Service Level Agreement Commands
Task ID
Task ID
monitor
Examples
The following example shows how to set the number of hours in which statistics are maintained for the IP
SLA UDP jitter operation for the statistics command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)# statistics hourly
RP/0/0/CPU0:router(config-ipsla-op-stats)#
The following example shows how to collect statistics for a specified time interval, using the statistics
command in an IP SLA UDP jitter operation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)# statistics interval 60
RP/0/0/CPU0:router(config-ipsla-op-stats)#
The following example shows how to set the number of hours in which statistics are maintained for the IP
SLA MPLS LSP monitor ping operation, using the statistics command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)# statistics hourly
RP/0/0/CPU0:router(config-ipsla-mplslm-stats)#
Related Commands
Command
buckets (statistics hourly), on page 123
buckets (statistics interval), on page 125
distribution count, on page 134
distribution interval, on page 136
monitor, on page 168
mpls lsp-monitor, on page 172
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Operations
read, write
Description
Sets the number of hours in which statistics are kept.
Refers to the data buckets in which the enhanced
history statistics are kept.
Sets the number of statistics distributions that are kept
for each hop during the lifetime of the IP SLA
operation.
Sets the time interval (in milliseconds) for each
statistical distribution.
Configures an IP SLA MPLS LSP monitor instance.
Configures MPLS label switched path (LSP)
monitoring.
statistics
257
Advertisement
Table of Contents
