Table of Contents
Advertisement
performance-mgmt resources tftp-server
performance-mgmt resources tftp-server
To configure a destination TFTP server for PM statistics collections, use the performance-mgmt resources
tftp-server command in global configuration mode. To disable the resource, use the no form of this command.
performance-mgmt resources tftp-server ip-address {directory| dir-name}{vrf| {vrf_name| default}|
{directory| dir-name}}
no performance-mgmt resources tftp-server
Syntax Description
tftp-server ip-address
directory dir-name
vrf vrf_name
default
Command Default
A destination TFTP server is not configured and data is not copied out of the system after a collection cycle
(sampling-size) ends.
Command Modes
Global configuration
Command History
Release
Release 3.2
Usage Guidelines
Use the performance-mgmt resources tftp-server command to configure a TFTP resource for performance
management. By creating a directory name on the TFTP server, you create a place where statistics can be
collected when statistics collection is enabled.
Use the no form of this command to disable the TFTP resource.
Files copied to the TFTP server contain a timestamp in their name, which makes them unique. For that
Note
reason the TFTP server used should support creation of files as data is transferred, without requiring users
to manually create them at the TFTP server host in advance.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
384
Specifies the IP address of the TFTP server.
Specifies the directory where performance management statistics
will be copied.
Specifies the name of the VRF instance.
Specifies the default VRF.
Modification
This command was introduced.
Performance Management Commands
OL-24735-01
Advertisement
Table of Contents
