Table of Contents
Advertisement
threshold type consecutive
Examples
The following example shows how to use the threshold type consecutive command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react connection-loss
RP/0/0/CPU0:router(config-ipsla-react-cond)# threshold type consecutive 8
The following example shows how to use the threshold type consecutive command in IP SLA MPLS LSP
monitor reaction condition configuration mode:
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# reaction monitor 2
RP/0/0/CPU0:router(config-ipsla-mplslm-react)# react connection-loss
RP/0/0/CPU0:router(config-ipsla-mplslm-react-cond)# threshold type consecutive 2
Related Commands
Command
action (IP SLA), on page 117
mpls lsp-monitor, on page 172
operation, on page 174
schedule operation, on page 215
reaction monitor, on page 197
reaction operation, on page 199
react, on page 192
threshold, on page 267
threshold type average, on page 269
threshold type immediate, on page 273
threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
272
IP Service Level Agreement Commands
Description
Specifies what action or combination of actions the
operation performs.
Configures MPLS label switched path (LSP)
monitoring.
Configures an IP SLA operation.
Schedules an IP SLA operation.
Configures MPLS LSP monitoring reactions.
Configures certain actions that are based on events
under the control of the IP SLA agent.
Specifies an element to be monitored for a reaction.
Sets the lower-limit and upper-limit values.
Takes action on average values to violate a threshold.
Takes action immediately upon a threshold violation.
Takes action upon X violations in Y probe operations.
OL-24735-01
Advertisement
Table of Contents
