Table of Contents
Advertisement
Performance Management Commands
performance-mgmt apply thresholds
To apply a thresholds template and enable threshold collection, use the performance-mgmt apply thresholds
command in global configuration mode. To stop threshold collection, use the no form of this command.
performance-mgmt apply thresholds entity location {all | node-id} {template-name | default}
no performance-mgmt apply thresholds
Syntax Description
entity
location {all |
node-id}
template-name
default
OL-24735-01
Specifies an entity for which you want to apply a threshold template:
• bgp—Applies a threshold monitoring template for Border Gateway Protocol (BGP).
• interface data-rates—Applies a threshold monitoring template for data rates.
• interface generic-counters—Applies a threshold monitoring template for generic
counters.
• mpls ldp—Applies a template for monitoring an MPLS Label Distribution Protocol
(LDP) neighbor.
• node cpu—Applies a threshold monitoring template for central processing unit (CPU)
utilization. Use the location keyword in conjugation with the all keyword or node-id
argument when enabling a statistics collection template for this entity.
• node memory—Applies a threshold monitoring template for memory utilization. Use
the location keyword in conjugation with the all keyword or node-id argument when
enabling a statistics collection template for this entity.
• node process—Applies a threshold monitoring template for processes. Use the location
keyword in conjugation with the all keyword or node-id argument when enabling a
statistics collection template for this entity.
• ospf v2protocol—Applies a threshold monitoring template for OSPFv2.
• ospf v3protocol—Applies a threshold monitoring template for OSPFv3.
Specifies all nodes or a particular node.
Specify the location all keywords for all nodes, or the node-id argument to specify a particular
node. The node-id argument is entered in the rack/slot/module notation. You must specify
either the location all keywords or the location keyword and node-id argument with the
node cpu, node memory, or node process entity.
Name of a predefined template used for threshold collection. A template name can be any
combination of alphanumeric characters, and may include the underscore character (_). Use
the
show running performance-mgmt, on page 411
templates.
Applies the default template.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
performance-mgmt apply thresholds
command to display a list of available
377
Advertisement
Table of Contents
