IP Service Level Agreement Commands
type icmp echo
To use the ICMP echo operation type, use the type icmp echo command in IP SLA operation configuration
mode. To remove the operation, use the no form of this command.
type icmp echo
no type icmp echo
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
IP SLA operation configuration
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
monitor
Examples
The following example shows how to use the type icmp echo command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type icmp echo
RP/0/0/CPU0:router(config-ipsla-icmp-echo)#
Related Commands
Command
operation, on page 174
schedule operation, on page 215
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
type icmp echo
283