Alarm - Cisco XR 1200 series Command Reference Manual

Alarm Management and Logging Correlation Commands

alarm

To specify a type of alarm to be suppressed by a logging suppression rule, use the alarm command in logging
suppression rule configuration mode.
alarm msg-category group-name msg-code
Syntax Description
msg-category
group-name
msg-code
Command Default
No alarm types are configured by default.
Command Modes
Logging suppression rule configuration
Command History
Release
Release 3.8.0
Usage Guidelines
Task ID
Task ID
logging
Examples This example shows how to configure the logging suppression rule "commit" to suppress alarms whose root
message are "MBGL", with group name "commit" and message code "succeeded":
RP/0/0/CPU0:router(config)# logging suppress rule commit
RP/0/0/CPU0:router(config-suppr-rule)# alarm MBGL COMMIT SUCCEEDED
Related Commands
Command
logging suppress rule, on page 37
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Message category of the root message.
Group name of the root message.
Message code of the root message.
Modification
This command was introduced.
Operations
read, write
Description
Creates a logging suppression rule.
alarm
3