Type Udp Echo - Cisco XR 1200 series Command Reference Manual

type udp echo

type udp echo
To use the UDP echo operation type, use the type udp echo command in IP SLA operation configuration
mode. To remove the operation, use the no form of this command.
type udp echo
no type udp echo
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
IP SLA operation configuration
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
monitor
Examples The following example shows how to use the type udp echo command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp echo
RP/0/0/CPU0:router(config-ipsla-udp-echo)#
Related Commands
Command
operation, on page 174
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
290
IP Service Level Agreement Commands
Modification
This command was introduced.
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
OL-24735-01