Cisco XR 1200 series Command Reference Manual page 218

reply dscp
it acts on the headers of echo replies for all operations associated with the monitored provider edge (PE)
routers. This configuration is inherited by all LSP operations that are created automatically.
Task ID
Task ID
monitor
Examples
The following example shows how to use the reply dscp command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mpls-lsp-ping)# reply dscp 5
Related Commands
Command
operation, on page 174
schedule operation, on page 215
type mpls lsp ping, on page 286
type mpls lsp trace, on page 288
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
206
IP Service Level Agreement Commands
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
Tests connectivity in an LSP path in an MPLS VPN.
Traces the hop-by-hop route of an LSP path in an
MPLS VPN.
OL-24735-01