Cisco XR 1200 series Command Reference Manual page 385

Performance Management Commands
Task ID
Task ID
monitor
Examples
This example shows how to enable the BGP protocol monitoring using the criterion set in the default template:
RP/0/0/CPU0:router(config)#performance-mgmt apply monitor bgp 10.0.0.0 default
This example shows how to enable monitoring for data rates according to the criterion set in the default
template:
RP/0/0/CPU0:router(config)#performance-mgmt apply monitor interface data-rates pos 0/2/0/0
default
This example shows how to enable memory monitoring based on the criterion set in the default template:
RP/0/0/CPU0:router(config)#performance-mgmt apply monitor node memory location 0/1/cpu0
default
Related Commands
Command
performance-mgmt apply statistics, on page 374
performance-mgmt statistics, on page 386
show running performance-mgmt, on page 411
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
performance-mgmt apply monitor
Operations
read, write, execute
Description
Applies a statistics template and enables statistics
collection.
Creates a template to use for collecting performance
management statistics.
Displays a list of templates and the template being
applied.
373