Cisco ios xr system monitoring command reference (433 pages)
Summary of Contents for Cisco XR 12000
Page 1
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28456-02...
Page 2
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
C H A P T E R 2 show arp trace show captured packets show cfgmgr trace show im database show imds interface brief show netio chains show netio clients Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
C H A P T E R 4 show system verify show tech-support show tech-support aps show tech-support asic show tech-support bcdl show tech-support bundles show tech-support cef Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
What's New in Cisco Product Documentation. To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What's New in Cisco Product Documentation RSS feed. RSS feeds are a free service.
Page 8
Preface Obtaining Documentation and Submitting a Service Request Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x viii OL-28456-02...
26 • show controllers pse qfp system state, page 28 • show controllers pse uidb , page 29 • show packet-memory, page 30 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The show controllers plim asic tx-channel bay command was replaced by the show controllers plim asic egress-channel bay command. Usage Guidelines Task ID Task ID Operations interface read root-system read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 11
The “Buffer Almost Full Threshold” is expressed in hexadecimal format. Tx Queuing ASIC port number Identifies the SPI4.2 transmit port. 1 System Packet Level Interface 4.2 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The show controllers plim asic rx-channel baycommand was replaced by the show controllers plim asic ingress-channel bay command. Usage Guidelines Task ID Task ID Operations interface read root-system read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following sample output is from the show controllers plim asic spa bay command: RP/0/0/CPU0:router# show controllers plim asic spa bay 0 location 0/4/CPU0 SPA 0 table: ======================================= SPA OIR state : present SPA state : enabled Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 17
Layer 2 Length Adjust. When a length entry has been read or is being written, this bit contains the value of the L2LA field. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 18
Tstat bus. Selects rising or falling edge as the active transmit SClk edge. DIP4 Match Total number of 2-bit DIP4 packets that met specific match clauses. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 19
SPA. 3 online insertion and removal 4 Extended Flow Control 5 security policy index 6 2-bit Diagonal Interleaved Parity 7 megahertz Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Usage Guidelines Task ID Task ID Operations interface read root-system read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 21
Number of octets received or transmitted on the interface. TotalPkts Number of total packets received or transmitted on the interface. UnicastPkts Number of unicast packets received or transmitted on the interface. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 22
Number of packets (including bad packets) received or transmitted that were between 1519 and 1548 octets in length inclusive (excluding framing bits but including FCS octets). Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 23
(FCS error) or a bad FCS with a non-integral number of octets (assigned error). DeferralAbort Number of deferral aborts that occurred on this segment. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 24
RxFiFO Drop Displays the receive FIFO drop information. PAR Tail Drop Displays PAR tail drop information. TxFIFO Drop Displays transmitted FIFO drop information. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Examples The following example shows how to display summarized PLIM ASIC SPAQFPBridgeCtrl driver information: RP/0/RP00/CPU0router# show controllers plim asic SPAQFPBridgeCtr Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Name : PLASPA Version Port 0 Jacket slot: 1 SPA type : SPA_NAME_UNKNOWN Port 1 Jacket slot: 3 SPA type : SPA_NAME_UNKNOWN Port 2 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 27
SPA. • SPA type —Describes the SPA whose information is displayed. • Port—Port associated with the PLIM ASIC. • Inst#—SPA ASIC instance Identifier. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 28
• Key—AISC key, in hexadecimal format. • Hkey—ASIC registry key. • Hkey idx—ASIC registry key index. 8 Universal interface descriptor block Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Operations interface read drivers read Examples The following command shows how to use the show controllers pse command: RP/0/0/CPU0:router# show controllers pse egress gather Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Operations interface read drivers read Examples The following command shows how to use the show controllers pse mem command: RP/0/RP0/CPU0:router# show controllers pse mem Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The optional egress or ingress and location keywords are not mutually exclusive. The egress and ingress keywords direct the command to specific PSE device, and the location keyword directs the command to that Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 32
Policed & Dropped ---------- ------ ----------------- IPv4 L2LI punt ACL log IPv6 L2LI punt Drop Stats Dropped ---------- ------- Pre-route no adjacency in PIT Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 33
Displays all statistics maintained by the PSE. Related Commands Command Description show controllers pse summary Displays a summary of packet switching engine information for a specific controller or node. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Examples The following command shows how to display PSE QFP statistics: RP/0/0/CPU0:router# show controllers pse qfp statistics summary location 0/1/cpu0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 35
Summary of Statistics for QFP 1 Dropped packets: 0 Incoming packets: 0 Outgoing packets: 0 Incoming IPC packets: 0 Outgoing IPC packets: 0 Punted packets: 0 Injected packets: 0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following command shows how to run the show controllers pse qfp system state command: RP/0/0/CPU0:router# show controllers pse qfp system state location 0/1/cpu0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Examples The following command shows how to use the show controllers pse uidb command: RP/0/RP0/CPU0:router# show controllers pse uidb trace Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays detailed packet memory information for the designated node. The node-id argument is entered in the rack/slot/module notation. Command Default Displays information about all packet memory. Command Modes EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 39
Operations basic-services read Examples The following example shows how to display packet memory information: RP/0/0/CPU0:router# show packet-memory Packet memory statistics : ========================== Packet headers Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 40
Scratch pad shared among the features in the packet path, listing hangs of the packet header. Packet trace Data associated with the packet header to help tracing a packet in the system. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
This module describes commands used for troubleshooting routers running Cisco IOS XR software. The commands in this chapter with the cisco-support task ID are used in the Cisco IOS XR Troubleshooting Guide for Cisco XR 12000 Series Router as part of the troubleshooting process. For information about commands with the cisco-support task ID that are not documented in this chapter, please contact Cisco Technical Support.
Page 42
79 • show uidb trace, page 82 • show uidb index , page 85 • watchdog threshold memory, page 88 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Command Default No default behavior or values Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 48
Source, destination, and type or length values in the Ethernet header. IPV4 Depending on the type of packet, the layer 3 packet header follows. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following example shows the output of the show cfgmgr trace command: RP/0/0/CPU0:router#show cfgmgr trace 130 wrapping entries (2048 possible, 0 filtered, 130 total) Apr 23 21:15:58.587 cfgmgr/common 0/RP0/CPU0 t5 Req '4': Save interface config] Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Apr 26 11:56:55.677 cfgmgr/common 0/RP0/CPU0 t1 Config media returned from dis. Related Commands Command Description show cfgmgr commitdb Displays the contents of the commit database for the configuration manager. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
For more information about the syntax for the router, use the question mark (?) online help function. location node-id Displays IM database information for a specified node. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
8000 91 (fint_base) 0x01180020 GigabitEthernet0/1/5/0 0x1002f up 1514 30 (ether) 0x01180040 GigabitEthernet0/1/5/1 0x1002f up 1514 30 (ether) 0x01180060 GigabitEthernet0/1/5/2 0x1002f up 1514 30 (ether) Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 56
Table 11: show imds interface brief Field Descriptions Field Description name Interface name. state Interface state. MTU associated with the interface. encap Base encapsulation associated with the interface. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
No default behavior or values. Command Modes EXEC Command History Release Modification Release 3.8.0 This command was introduced. Release 3.9.0 No modifications. Release 4.0.0 No modifications. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following example shows the output of the show netio db command. RP/0/0/CPU0:router# show netio db caps location 0/1/0 Capsulation (ID) Load Count DLL Name Refcount Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 63
Displays protocol registrations for media changes. show netio subblock Displays Netio subblock information. Displays Netio trace data. show netio trace Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
No default behavior or values Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Release 3.8.0 Changed the interface-type interface-instance arguments to required ones. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 66
IN unknown proto bytes Number of bytes sent to netio that had an unknown protocol type. IN multicast pkts Number of ingress multicast packets for the interface. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 67
Number of bytes in for the address family. Pkts Out Number of packets out for the address family. Bytes Out Number of bytes out for the address family. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 68
Displays protocol registrations for media changes. show netio media registrations show netio subblock Displays Netio subblock information. show netio trace Displays Netio trace data. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays Netio subblock information for a specified node. The node-id argument is entered in the rack/slot/module notation. Command Default No default behavior or values. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 72
Related Commands Command Description show netio chains Displays Netio chains information. show netio clients Displays Netio clients information. Displays Netio database information. show netio db Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 73
Displays Netio IDB information. show netio media registrations Displays protocol registrations for media changes. show netio trace Displays Netio trace data. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the latest traces first stats (Optional) Displays statistics tailf (Optional) Displays new traces as added unique (Optional) Displays unique entries with counts Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 75
18 (lpts), caps 60 (txm_nopull), op ADD, chain F, data len 0 Jan 11 15:04:16.542 netio/chains--- 0/0/CPU0 t1 Chains: update IDB chain, ifhandle Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 76
Displays Netio IDB information. Displays protocol registrations for media changes. show netio media registrations show netio subblock Displays Netio subblock information. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Examples The following example shows the output of the show sysdb connections command. RP/0/0/CPU0:router# show sysdb connections detail location 0/1/CPU0 SysDB Connections: "/debug/node/11/LR/sysdb/client/" Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 78
N Verf susp: Client connid: 00000000 Connected at: Jul 14 19:31:47.316 "/debug/node/11/LR/sysmgr/" From: sysmgr (jid 79, nid 0/1/CPU0, tid 7) Connid: 00000013 Refcount: 0002 Options: 00000032 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
323 wrapping entries (4096 possible, 299 filtered, 622 total) 7 20:10:36.212 8782 apply reply '--' 7 20:10:35.476 4912 Apply/abort called 'cfg/if/act/GigabitEthernet0_3_4_0.1/a/sub_vlan/0x2/________/Gigab itEthernet0_3_4_0/________' Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 80
Table 13: show sysdb trace verification location Field Descriptions Field Description Timestamp Time of the verification. Job identifier of the verification. Thread identifier. reg handle Registration handle. connid Connection identifier. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 81
Verifier has accepted the verification request. Related Commands Command Description show sysdb connection path shared-plane Displays system database client connection shared plane data for a specific path. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Use the show sysdb trace verification shared-plane command to display details of recent verification sysDB transactions and changes on the shared plane. The command output allows you to confirm whether the configuration was verified correctly. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 83
Client has registered with sysDB server for verification. Related Commands Command Description show sysdb connection path shared-plane Displays sysDB client connection shared plane data for a specific path. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Displays prefix-related information. location node-id Displays tree bitmap hardware-related information for a specified node. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 86
PLU: Num Copies Number of copies to the PLU portion of the hardware. PLU Memory Channel Statistics Usage levels of each channel in the PLU memory. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays micro-IDB index data information for a specified node. The node-id argument is entered in the rack/slot/module notation. Command Default No default behavior or values Command Modes EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 89
82 Displays UIDB trace data debugging information that helps in troubleshooting the problem. show uidb data-dump Displays UIDB data information in hexadecimal format. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the wrapping entries in the command output. location node-id (Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 91
Successful : Checkpoint ingree Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1 Entering : Checkpoint egress e Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1 Successful : Checkpoint egrese Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 92
Related Commands Command Description show uidb data, on page 79 Displays UIDB index data information. Displays UIDB data information in hexadecimal show uidb data-dump format. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Command Default No default behavior or values Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 94
0/6/CPU0 GigabitEthernet0_6_5_4 Main interface 0/6/CPU0 GigabitEthernet0_6_5_5 Main interface 0/6/CPU0 GigabitEthernet0_6_5_6 Main interface 0/6/CPU0 GigabitEthernet0_6_5_7 Main interface 0/6/CPU0 POS0_6_0_0 Main interface 0/6/CPU0 POS0_6_4_0 Main interface Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 95
79 Displays micro-interface descriptor block index data information. show uidb data-dump Displays micro-interface descriptor block data information in hexadecimal format. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
This table lists the recommended memory threshold value calculations if the minor threshold is set to 20 percent, the severe threshold is set to 10 percent, and the critical threshold is set to 5 percent. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 97
The following example shows how to configure the memory available for each alarm threshold: RP/0/0/CPU0:router #configure RP/0/0/CPU0:router(config)# watchdog threshold memory location 0/RP0/CPU0 minor 30 severe 20 critical 10 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 98
Troubleshooting Commands watchdog threshold memory Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 99
109 • show controllers fabricq queue, page 112 • show controllers fabricq registers, page 115 • show controllers fabricq tofab, page 118 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Displays output from the fabric statistics associated with the fabric queue driver. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following example shows how to clear the from fabric queue counters for the location 0/1/CPU0: RP/0/0/CPU0:router# admin RP/0/0/CPU0:router(admin)# clear fabricq counters frfab location 0/1/CPU0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 102
Related Commands Command Description show controllers fabricq frfab, on page 105 Displays output from the fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following example shows how to clear all to fabric queue counters for the location 0/1/CPU0: RP/0/0/CPU0:router # admin RP/0/0/CPU0:router(admin)# clear fabricq counters tofab location 0/1/CPU0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 104
Related Commands Command Description show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Use the show controllers fabric command to display various registers associated with the fabric cards and state information associated with the fabric control software. Task ID Task ID Operations root-system read, write Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following is detailed sample output from the show controllers fabricq drop command for location 0/1/CPU0: RP/0/0/CPU0:router# admin RP/0/0/CPU0:router(admin)# show controllers fabricq drop detail location 0/1/CPU0 Location 0/1/0: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 108
Slot Rx-REF Rx-PKT Rx-DEC Rx-Total Legend: Rx-REF: Drops in the FPGA reassembly Rx-PKT: Drops due to invalid packet Rx-DEC: Drops due to decoding the packet Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 109
Rx-REF Number of received packets that were dropped in the FPGA reassembly. Rx-PKT Number of received packets that were dropped because they were invalid. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 110
Displays the hardware registers of the chopper and assembler FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Location 0/1/0: ToFab Errors: Error Type Error Count Max Rate Rate Exceeded Count ----------------------------------------------------------- SRAM Parity DMA Address DMA Size Fusilli Parity PCI TRANS64 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 112
Displays the hardware registers of the chopper and assembler FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Command Default From fabric statistics are displayed for all route processors (RPs) on the router Command Modes Administration EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 114
IDB queue tail drops Chan corrupted pkts First/Last err pkts Sequence err pkts Unknown Rx type Output queue 0 full drops Output queue 1 full drops Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 115
Displays the count of hardware errors associated with the fabric queue driver. show controllers fabricq output, on page 109 Displays the fabric output service statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 116
Displays the hardware registers of the chopper and assembler FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
The following is sample output from the show controllers fabricq output command for location 0/1/CPU0: RP/0/0/CPU0:router# admin RP/0/0/CPU0:router(admin)# show controllers fabricq output location 0/1/CPU0 Location 0/1/0: To Fabric servicing time statistics: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 118
Average service time of all the packets sent to that slot. Timeouts Number of times a packet’s service time has exceeded a threshold of 200 milliseconds (the packet is dropped). Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 119
Displays the hardware registers of the chopper and assembler FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
RP/0/0/CPU0:router(admin)# show controllers fabricq queue detail location 0/1/CPU0 Location 0/1/0: To Fabric Queue Stats: ---------------------- Slot EnQueued DeQueued Cur-Entrys Max-Entrys Blocked BP count Low Priority: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 121
Number of entries currently for that queue. Max-Entrys Highest number of entries for that queue. Blocked Yes or No if that queue is blocked. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 122
Displays the hardware registers of the chopper and assembler FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 125
FPGAs. show controllers fabricq tofab, on page 118 Displays to fabric statistics associated with the fabric queue driver. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Command Default Statistical information is displayed for all route processors (RPs) on the router Command Modes Administration EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 127
Table 24: show controllers fabricq tofab Field Descriptions Field Description Tx-pkts Number of packets sent to that slot. Tx-TH-pkts Number of “think hard” packets sent to that slot. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 128
Displays information about the hardware queues of the performance route processor chopper and assembler FPGAs. show controllers fabricq registers, on page Displays the hardware registers of the chopper and assembler FPGAs. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 129
Tech-Support Commands This module describes commands used for displaying the output of show commands using Cisco IOS XR software software. The command output varies depending on the router platform and configuration. The show tech-support commands all display common data from commands such as show version . Each show tech-support command also generates and gathers relevant data for a specific area.
Page 130
• show tech-support sysdb, page 296 • show tech-support terminal, page 298 • show tech-support tty, page 303 • show tty details, page 305 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Examples The following example shows how to prepare for system verification: RP/0/0/CPU0:router# show system verify start Storing initial router status ... done. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 132
- Verified Syslog Messages : [OK] System may not be stable. Please look into WARNING messages. This table describes the significant fields shown in the display. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 133
Total number packets input to the interface Bytes Input Total number of bytes input to the interface Packets Output Total number of packets output by the interface Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 134
Number of virtual interfaces neighbors Number of OSPF neighbors configured neighbors_adj Number of OSPF configured neighbors that are ‘adjacent’ Syslog Messages on router Number of syslog messages Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
• nvram: filename • rcp: filename • slot0: filename • slot1: filename • tftp: filename background (Optional) Specifies that the command runs in the background. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 136
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 137
• show controllers plim asic pla eio links all • show controllers fia eio links all • show controllers cpuctrl summary • admin show controllers fabric plane all Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 138
• admin show controllers fabric sfe s3 all detail • show environment all See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
(Optional) Specifies that the command output is displayed on the terminal. location (Optional) Specifies a node. node-id (Optional) Node ID. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 140
RP/0/0/CPU0:router# show tech-support aps show-only terminal ------------------------------------------------------------------------------- show tech-support aps ------------------------------------------------------------------------------- ---------------------------------- show aps ----------------------------------- no aps group found ------------------------------- show aps agents ------------------------------- Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 141
Tx laser current bias = 0.0 mA Port SONET0/6/0/1: Status: Up Loopback: None SECTION LOF = 0 BIP(B1) = 0 LINE AIS = 0 FEBE = 0 BIP(B2) = 0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 142
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ Detected Alerts: None Reported Alerts: None Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 143
PATH TRACE BUFFER : STABLE Remote hostname : PE21_C12406 Remote interface: POS0/2/0/3 Remote IP addr : 10.121.4.21 No APS Group Configured Protect Channel 0 DISABLED Rx(K1/K2) : 0x00/0x00 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 144
Optics type: None Clock source: internal (actual) line (configured) Rx S1: 0x0 Tx S1: 0xf Optical Power Monitoring (accuracy: +/- 1dB) Not Supported Port SONET0/6/4/1: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 145
0 ms clear: 10000 ms Path delays trigger: 0 ms, 0 ms (configured), clear: 10000 ms Last clearing of "show controllers SONET" counters never Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Node ID. The node-id argument is entered in the rack/slot/module notation. Command Default No default behavior or values Command Modes Administration EXEC Command History Release Modification Release 3.4.0 This command was introduced. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 152
Use the show tech-support asic command to save an ASIC snapshot. This command generates ASIC information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Page 153
RP/0/0/CPU0:router(admin)# show tech-support asic all inst 0 dir net/node0_RP0_CPU0/ harddisk:/asic_snapshots/ results in following files being created with contents.. # pwd /net/node0_RP0_CPU0/harddisk:/asic_snapshots # ls -lrt total 980 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
• slot0: filename • slot1: filename • tftp: filename background (Optional) Specifies that the command runs in the background. compressed (Optional) Displays compressed command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 155
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 156
Tech-Support Commands show tech-support bcdl See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
(Optional) Displays the command output with no compression. interface (Optional) Collects information about a specific interface. type Interface type. For more information, use the question mark (?) online help function. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 158
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 159
See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
(Optional) Specifies detailed CEF debugging information. brief (Optional) Specifies a brief CEF debugging information. (Optional) Specifies that the command output is saved to a specified file. file Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 161
Press the Ctrl-C keys to stop the command output. Command Default IPv4 is the default. The command output is not compressed. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 162
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 163
• show mpls forwarding (if the mpls keyword is specified) See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
(Optional) Displays compressed command compressed output. (Optional) Displays the command output with uncompressed no compression. Specifies that the command output is displayed terminal on the terminal. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 165
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies a node. node-id (Optional) Node ID. The node-id argument is entered in the rack/slot/module notation. rack (Optional) Displays a list of racks. Command Default None. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 167
Examples The following example how to run the show tech-support chdlc command on the router: RP/0/0/CPU0:router# show tech-support chdlc interface gigabitEthernet 0/6/5/0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl-C keys to stop the command output. file Specifies that the command output is saved to a specified file. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 169
Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 170
• show controller backplane ethernet trace node-id See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html The show tech-support control-ethernet command also generates log files which are not listed.
Page 171
4 Management Ethernet 16 GigabitEthernet 20 SONET/SDH 20 Packet over SONET/SDH 1019k bytes of non-volatile configuration memory. 1000592k bytes of disk0: (Sector size 512 bytes). Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 172
By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0 hfr-fwdg, V 3.8.0.20I[DT_IMAGE], Cisco Systems, at disk0:hfr-fwdg-3.8.0.20I Built on Wed Oct 29 16:13:27 DST 2008 By iox30.cisco.com in /auto/ioxbuild6/production/3.8.0.20I.DT_IMAGE/hfr/wor0 --More-- Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
• nvram: filename • rcp: filename • slot0: filename • slot1: filename • tftp: filename (Optional) Specifies that the command runs in the background. background Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 174
The following show commands run automatically when you run the show tech-support dsc command: • show dsc all See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 175
Current process = "pkg/bin/dsc", PID = 110638 TID = 5 trace_back: #0 0xfc177518 [MsgReceivev] trace_back: #1 0xfc161354 [msg_receivev] trace_back: #2 0xfc161160 [msg_receive] trace_back: #3 0xfc16479c [event_dispatch] trace_back: #4 0xfc164958 [event_block] Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 176
Last started: Fri Mar 16 14:56:35 2007 Process state: Run Package state: Normal core: COPY Max. core: 0 Level: 40 Mandatory: ON MaintModeProc: ON startup_path: /pkg/startup/dsc.startup Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. rack (Optional) Specifies a list of racks. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 179
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 180
Tech-Support Commands show tech-support ethernet See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl-C keys to stop the command output. file (Optional) Specifies that the command output is saved to a specified file. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 182
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 183
• show controllers ingressq block fqm queue • show controllers ingressq vports all • show controllers ingressq interfaces all • show controllers ingressq eio links all Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 184
• show controllers cpuctrl devices fabricq pdma queue all act See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
Press the Ctrl-C keys to stop the command output. Specifies that the command output is saved to a specified file. file Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 186
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 187
Use the show tech-support gsp command to run show commands that display information specific to GSP debugging. GSP is a common IPC utilized in Cisco IOS XR software to communicate between nodes. This command would be used to determine if there are any issues with GSP communication between nodes. This command generates GSP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router.
Page 188
Tech-Support Commands show tech-support gsp Task ID Task ID Operations basic-services or cisco-support read sysmgr read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 190
• show install trace io location node-id • show install trace instdir-lr location node-id • show install trace insthelper location node-id • show install trace notify location node-id Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 191
• show filesystem location node-id • run diskinfo (various) See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 192
By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0 asr9k-mpls, V 3.9.0[00], Cisco Systems, at disk0:asr9k-mpls-3.9.0 Built on Mon Dec 14 13:31:50 UTC 2009 By sjc-lds-524 in /auto/srcarchive3/production/3.9.0/asr9k/workspace for c4.2.1-p0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 193
----------------- show igmp snooping summary statistics debug ----------------- Bridge Domains: IGMP Snooping Bridge Domains: Ports: IGMP Snooping Ports: Mrouters: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 194
Network Statistics (elapsed time since last cleared 6d20h): Socket Event: Network Connection Open Event: Network Connection Close Event: Packet Event: Packet Event Disconnect: Packet Event Empty: Packet Event Empty Watermark: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 195
IGMP V2 Leaves: IGMP Global Leaves: PIM Hellos: Rx Packet Treatment: Packets Flooded: Packets Forwarded To Members: Packets Forwarded To Mrouters: Packets Consumed: Rx Errors: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 196
Tech-Support Commands show tech-support igmp snooping None Rx Other: None Tx Errors: None Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
• nvram: filename • rcp: filename • slot0: filename • slot1: filename • tftp: filename background (Optional) Specifies that the command runs in the background. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 198
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 199
• show processes memory location node-id • show processes aborts location node-id • show processes blocked location node-id • show pkgfs trace location node-id Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 200
• show filesystem location node-id • run diskinfo (various) See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 202
Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier. This command collects relevant data for Layer 2 tunneling protocol-related issues that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Page 203
Proc-ICRQ Wt-Rx-ICCN Proc-ICCN Wt-Tx-ICRQ Wt-Tx-ICRP Wt-Tx-ICCN Wt-Rx-ICRP Proc-ICRP established Dead ----------- show l2tp counters control session fsm state transition ----------- Old State New State Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 204
Last started: Thu Oct 11 19:25:05 2007 Process state: Run Package state: Normal core: TEXT SHAREDMEM MAINMEM Max. core: 0 Level: 999 Placement: ON startup_path: /pkg/startup/l2tp.startup Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. rack (Optional) Displays the list of racks. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 206
Redirecting the output to a file also makes sending the output to your Cisco Technical Support representative easier. This command collects information for Layer 2 VPN related issues that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Page 207
2 15:07:32 DST 2007 By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8 hfr-pagent, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-pagent-3.6.0.I Built on Tue Oct 2 15:58:47 DST 2007 By iox42.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE1/hfr/8 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 208
V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-doc-3.6.0.16I Built on Tue Oct 2 14:48:52 DST 2007 By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8 hfr-diags, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-diags-3.6.0.16I Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 209
2 14:48:32 DST 2007 By sjce-gf-071.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8 hfr-mcast, V 3.6.0.16I[SIT1_IMAGE1], Cisco Systems, at disk0:hfr-mcast-3.6.0.16I Built on Tue Oct 2 14:26:29 DST 2007 By sjce-gf-061.cisco.com in /auto/ioxbuild2/production/3.6.0.16I.SIT1_IMAGE8 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. location (Optional) Specifies a node. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 211
(SDR) architecture. The system always has at least one SDR at any time. It collects relevant information when issues arise with the SDR management within the system. This command can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Page 213
10/11 10:19:17.772 1 lrd_get_dsc: dSC = 201 10/11 10:19:17.774 1 main: We are dSC. 10/11 10:19:17.776 1 main: Registering with SSM as service provider. Once ------------------------------------------------------------------------------- show tech-support lrd Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 214
LR name Info for Node = node0_RSP0_CPU0 dSC node: 0/RSP0/CPU0 standby dSC node: 0/RSP1/CPU0 LRs (Configured, pre-existing) basic info: Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 215
0x821 INFRA FINAL Active/Down 0xffffffff LC(2) 0/2/CPU0 0x841 INFRA FINAL Active/Down 0xffffffff LC(2) 0/3/CPU0 0x851 INFRA Unknown/Down 0xffffffff Config Info for Node = node0_RSP0_CPU0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 216
--- lrdbg -n -1: lrd server node states [17:21:37.766 UTC Fri Dec 18 2009] ---- +++ lrdbg -s -1: lrd server software states [17:21:37.914 UTC Fri Dec 18 2009] ++++ Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 217
Dec 14 15:43:48.408 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1 RUNNING_MBI Dec 14 15:45:05.176 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1 RUNNING_ENA Dec 15 14:53:15.444 lrd/sntf 0/RSP0/CPU0 t13 : 0/133/1 BRINGDOWN Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 218
------------------------------------------------------------------ Dec 14 11:19:47.723 lrd/sreg 0/RSP0/CPU0 t15 : 389 213071 DLRSC dlrsc-state Unknwn Dec 14 11:19:47.725 lrd/sreg 0/RSP0/CPU0 t15 : 406 213090 Node State Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 219
Dec 14 11:20:46.317 lrd/sreg 0/RSP0/CPU0 t15 : 225 208966 Node State Crt/Del card-state Dec 14 11:20:46.317 lrd/sreg 0/RSP0/CPU0 t15 : 225 208966 unknwn DLSRC Down card-state Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 220
Dec 14 11:20:18.381 lrd/supd 0/RSP0/CPU0 t1 : 0/RSP0/CPU0(0x1 ADMIN BAND INFRA BAND Active 0x11 Dec 14 11:20:54.823 lrd/supd 0/RSP0/CPU0 t4 : 0/RSP0/CPU0(0x1 INFRA BAND FINAL BAND Active 0x11 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays compressed command compressed output. (Optional) Displays the command output with uncompressed no compression. Specifies that the command output is displayed terminal on the terminal. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 222
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 223
Tech-Support Commands show tech-support mpls ldp Task ID Task ID Operations cisco-support read mpls-ldp read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 225
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies that the command runs in the background. background compressed (Optional) Displays compressed command output. uncompressed (Optional) Displays the command output with no compression. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 227
MPLS RSVP debugging. This command generates RSVP debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information. Note This command is not required during normal use of the router.
Page 228
• show rsvp trace client • show rsvp debug-error See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 229
Proxy Reservations: 0 Proxy Listeners: 1 TMB allocation: 0 Local Routes: 22 --------------------- show rsvp counters messages private --------------------- Routed Recv Xmit Recv Xmit Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Specifies the tunnel name that is used by the RSVP process. tunnel name Name for the tunnel. terminal Specifies that the command output is displayed on the terminal. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 233
This command is not required during normal use of the router. Note See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 234
IF DELETE NOTFN from IM MESSAGE to RSVP MESSAGES from RSVP MESSAGES to IGP SYSDB VRFNs SYSDB APPLYs MESSAGE to LSD MESSAGES from LSD Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 235
Node: 0/1/CPU0 Unresolved drops packets : Unsupported drops packets : Null0 drops packets : No route drops packets : No Adjacency drops packets : Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 236
Tech-Support Commands show tech-support mpls traffic-eng Checksum error drops packets : Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
If not used, the output scrolls (that is, it does not stop for page breaks). file (Optional) Specifies that the command output is saved to a specified file. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 238
(Optional) Specifies a VPN routing and forwarding (VRF) instance. vrf-name Name of VRF. Command Default Output is logged to the terminal screen. Command Modes EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 239
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 240
• show mfib hardware route statistics source-address location node-id • show mfib hardware resource-counter location node-id • show mfib hardware adjacency detail location node-id Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 241
• show mfib hardware route accept-bitmap detail source-address location node-id See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL:http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. rack (Optional) Displays the list of racks. Command Modes EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 243
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. rack (Optional) Displays the list of racks. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 245
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 247
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
If not used, the output scrolls (that is, it does not stop for page breaks). Press the Ctrl+C keys to stop the command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 249
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 250
Tech-Support Commands show tech-support pfi Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Specifies that the command runs in the background. compressed (Optional) Displays compressed command output. (Optional) Displays the command output with no compression. uncompressed Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 252
This command is not required during normal use of the router. See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
Page 253
Oct 11 19:24:07.350 properties Inserting Nodetypeaffinity (4832b950) (value -402 Oct 11 19:24:07.402 properties Inserting Nodetypeaffinity (4832b9b8) (value -40) Oct 11 19:24:07.562 properties Inserting Nodetypeaffinity (4832baf0) (value 100) Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the command output with no compression. Collects information about a specific interface. interface type Interface type. For more information, use the question mark (?) online help function. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 255
Press the Ctrl+C keys to stop the command output. Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 256
This command is not required during normal use of the router. See the Cisco IOS XR Software command references for information about these commands and descriptions of their command output. The Cisco IOS XR Software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
(Optional) Displays the command output with no compression. Collects information about a specific interface. interface type Interface type. For more information, use the question mark (?) online help function. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 260
See Obtaining Documentation and Submitting a Service Request section on page iii in the Preface for Cisco Technical Support contact information. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 261
This command is not required during normal use of the router. Note See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
(Optional) Specifies a node. location node-id Node ID. The node-id argument is entered in the rack/slot/module notation. rack (Optional) Displays the list of racks. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 263
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies that the command runs in the background. compressed (Optional) Displays compressed command output. (Optional) Displays the command output with no compression. uncompressed rack (Optional) Displays the list of racks. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 265
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies that the command runs in the background. background compressed (Optional) Displays compressed command output. uncompressed (Optional) Displays the command output with no compression. ipv4 (Optional) Displays the IPv4 command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 267
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies that the command runs in the background. background compressed (Optional) Displays compressed command output. uncompressed (Optional) Displays the command output with no compression. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 269
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 270
• show controllers pse statistics location node-id See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html...
(Optional) Specifies that the command runs in the background. compressed (Optional) Displays compressed command output. (Optional) Displays the command output with no compression. uncompressed Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 272
• show inst which comp clns-isis See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x...
Page 273
System Id: 0000.0000.0000 (Not configured, protocol disabled) IS Levels: level-1-2 Manual area address(es): Routing for area address(es): Non-stop forwarding: Disabled Most recent startup mode: Cold Restart Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 274
- IS-IS (redistributed from another instance) Maximum parallel path count: 8 IS-IS isp checkpoint interface Interface Handle CircNum DIS Areas Chkpt ID No 'checkpoint interfaces' found in IS-IS isp Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 275
30 (ether) state: 3 (up) mtu: 1514 protocol count: 4 control parent: 0x00000000 data parent: 0x00000000 protocol capsulation state --------------- -------------------- --------------- -------- 7 (arp) Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Press the Ctrl-C keys to stop the command output. file Specifies that the command output is saved to a specified file. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 277
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 278
• show ospf statistics te • show ospf statistics spf • show ospf statistics rib-thread • show ospf statistics rib-batch • show ospf message-queue • show ospf border-routers Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 279
The common non-ospf information such as version, placement info, logging and so on are not included. See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
• nvram: filename • rcp: filename • slot0: filename • slot1: filename • tftp: filename background (Optional) Specifies that the command runs in the background. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 281
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 282
• show ospfv3 database • show ospfv3 route See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
(Optional) Specifies that the command runs in the background. compressed (Optional) Displays compressed command output. (Optional) Displays the command output with no compression. uncompressed Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 284
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
Page 285
Tech-Support Commands show tech-support routing rpl Task ID Task ID Operations basic-services read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the command output with no compression. (Optional) Collects information about a specific interface. interface type Interface type. For more information, use the question mark (?) online help function. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 287
Press the Ctrl+C keys to stop the command output. Command Modes EXEC Command History Release Modification Release 3.2 This command was introduced. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 288
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Specifies that the command runs in the background. background (Optional) Displays compressed command output. compressed uncompressed (Optional) Displays the command output with no compression. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 290
This command is not required during normal use of the router. Note See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 291
<removed> <removed> control-plane management-plane inband interface all allow all ipv4 virtual address 10.0.0.14 255.0.0.0 hw-module service sbc location 0/4/CPU0 hw-module service sbc location 0/4/CPU1 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 292
10.0.0.14 255.0.0.0 interface GigabitEthernet0/1/5/3 shutdown interface GigabitEthernet0/1/5/4 shutdown interface GigabitEthernet0/1/5/5 shutdown interface GigabitEthernet0/1/5/6 description <removed> bundle id 28 mode active interface GigabitEthernet0/1/5/7 description <removed> Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
• slot0: filename • slot1: filename • tftp: filename (Optional) Specifies that the command runs in the background. background compressed (Optional) Displays compressed command output. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 296
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
• rcp: filename • slot0: filename • slot1: filename • tftp: filename locationnode-id (Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 298
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
(Optional) Displays the command output with no compression. (Optional) Collects information about a specific interface. interface type Interface type. For more information, use the question mark (?) online help function. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 300
Request' section on page iii in the Preface for Cisco Technical Support contact information. This command is not required during normal use of the router. Note Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 301
Tech-Support Commands show tech-support spaipc See the Cisco IOS XR software command references for information about these commands and descriptions of their command output. The Cisco IOS XR software command references are located at the following URL: http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html Task ID...
Page 302
GigabitEthernet0/1/5/0 description Connected to P2_CRS-8 GE 0/1/5/0 ipv4 address 10.12.16.1 255.255.255.0 interface GigabitEthernet0/1/5/1 description Connected to P4_C12810 GE 5/2 ipv4 address 10.14.8.1 255.255.255.0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 303
Tech-Support Commands show tech-support spaipc interface GigabitEthernet0/1/5/2 description Connected to PE6_C12406 GE 0/4/0/1 ipv4 address 10.16.4.1 255.255.255.0 interface GigabitEthernet0/1/5/3 shutdown interface GigabitEthernet0/1/5/4 shutdown interface GigabitEthernet0/1/5/5 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays compressed command output. uncompressed (Optional) Displays the command output with no compression. shared-plane (Optional) Displays the data for the shared plane. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 305
By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz tftp://server_path.
This command generates terminal information that relates to debugging information that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical Support contact information. Note This command is not required during normal use of the router.
Page 307
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 308
Connected to P2_CRS-8 GE 0/1/5/0 ipv4 address 10.12.16.1 255.255.255.0 interface GigabitEthernet0/1/5/1 description Connected to P4_C12810 GE 5/2 ipv4 address 10.14.8.1 255.255.255.0 interface GigabitEthernet0/1/5/2 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 309
24 mode active interface POS0/1/4/2 description Connected to P2_CRS-8 POS 0/1/4/2 ipv4 address 10.12.32.1 255.255.255.0 encapsulation ppp ppp pap sent-username P1_CRS-8 password encrypted <removed> Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 310
Tech-Support Commands show tech-support terminal ppp authentication chap pap ppp chap password encrypted <removed> interface POS0/1/4/3 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the command output with no compression. location node-id (Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 312
Tue Sep 04 09:44:31 UTC 2012 Compressing show tech output Show tech output available at 0/RP0/CPU0 : harddisk:/showtech/showtech-tty-2012-Sep-04.094121.UTC.tgz ++ Show tech end time: 2012-Sep-04.094432.UTC ++ Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Release 3.6.0 This command was introduced. Usage Guidelines Use the show critmon context command to display information about the context for the wd-critical-mon process. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 317
PunchTimestamp : 02/10/2008 01:11:10 PunchCounter ------------------------------------------------------------------------------ Ticker context info (Node: 0/2/CPU0) ------------------------------------------------------------------------------ CPU# Ticker counter : 61 Ticker last ran timestamp : 02/10/2008 01:11:10 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 318
Timestamp for the last time the wd-critical-mon ticker thread was run. Watcher context info wd-critical-mon watcher thread context information that is used for the node. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 319
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Task ID Operations cisco-support read Examples The following sample output is from the show critmon deadline command: RP/0/0/CPU0:router# show critmon deadline registration location all Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 321
308 Displays information about the context for the wd-critical-mon process. show critmon statistics, on page 315 Displays information about the critical monitor statistics. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 322
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Specifies all locations. Command Default No default behavior or values Command Modes EXEC Administration EXEC Command History Release Modification Release 3.6.0 This command was introduced . Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 328
Deadline monitoring statistics info (Node: 0/1/CPU0) ------------------------------------------------------------------------------ client SnapShotTimestamp Frequency (name) MM/DD/YYYY hh:mm:ss tick count (count/min) ------------------------ ------------------- ---------- ------------ wdsysmon 10/22/2007 14:33:53 wdsysmon 10/22/2007 14:48:53 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 329
Name of deadline monitoring client. Related Commands Command Description show critmon context, on page 308 Displays information about the context for the wd-critical-mon process. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 330
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Displays the wrapping entries in the command output. location (Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. node-id Specifies all locations. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 332
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Node ID. The node-id argument is entered in the rack/slot/module notation. Specifies all locations. Command Default No default behavior or values Command Modes EXEC Administration EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 334
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. location all Specifies all locations. Command Default No default behavior or values Command Modes EXEC Administration EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 336
Displays information about the trace data for the library error for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. location all Specifies all locations. Command Default No default behavior or values Command Modes EXEC Administration EXEC Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 338
Displays trace data for an information type for the critical monitor. show critmon trace lib-info, on page 331 Displays trace data for the library information for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
(Optional) Specifies a node. The node-id argument is entered in the rack/slot/module notation. location all (Optional) Specifies all locations. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 340
Displays trace data for an information type for the critical monitor. show critmon trace lib-error, on page 329 Displays information about the trace data for the library error for the critical monitor. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 343
340 Displays the latest crash information. show reboot pcds, on page 343 Displays Persistent Critical Data Store critical information for the last ungraceful reboot. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
[0x46ad8afe88] Complete Kernel dumper platform task without dumping. rc: 0 Related Commands Command Description show reboot first, on page 333 Displays reboot information for a node first. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 345
340 Displays the latest crash information. show reboot pcds, on page 343 Displays Persistent Critical Data Store critical information for the last ungraceful reboot. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Traceback: fc15b1a0 fc15b290 482 0020c fc1d5fb0 0 0 Thu Aug 16 16:32:35 2007 0x21000106 Cause: All fabric links down on Fabric Process: fabricq_mgr Traceback: fc15b1a0 fc15b290 fc9 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 347
340 Displays the latest crash information. show reboot pcds, on page 343 Displays Persistent Critical Data Store critical information for the last ungraceful reboot. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Crash Reason: Cause code 0x2000004f Cause: MBI-HELLO reloading node on receivin0 Exception at 0xfc160f60 signal 5 c=1 f=3 Active process(s): pkg/bin/mbi-hello Thread ID 2 on cpu 0 Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 349
Segment Registers Index # SR-Value 10 # 11 # 12 # 13 # 14 # 15 # Exception Handling Registers Data Addr Reg # DSISR Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 350
Displays reboot information for the last graceful reboot. show reboot pcds, on page 343 Displays Persistent Critical Data Store critical information for the last ungraceful reboot. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 353
338 Displays reboot information for the last graceful reboot. show reboot last, on page 340 Displays the latest crash information. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Use the show watchdog command to display information about the memory states or thresholds for a specified location. You can display the default or configured memory thresholds. Task ID Task ID Operations basic-services read Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 355
Free Memory: 2623.671 MB Memory State: Normal Related Commands Command Description watchdog threshold memory Configures the value of memory available for each alarm threshold. Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 356
Watchdog Commands show watchdog Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02...
Page 357
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x OL-28456-02 IN-1...
Page 358
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x IN-2 OL-28456-02...