Table of Contents
Advertisement
Alarm Management and Logging Correlation Commands
logging events buffer-size
To configure the size of the logging events buffer, use the logging events buffer-size command in global
configuration mode. To restore the buffer size to the default value, use the no form of this command.
logging events buffer-size bytes
no logging events buffer-size bytes
Syntax Description
bytes
Command Default
bytes: 43200
Command Modes
Global configuration
Command History
Release
Release 3.2
Usage Guidelines
The logging events buffer automatically adjusts to a multiple of the record size that is lower than or equal
Note
to the value configured for the bytes argument.
Use the
Task ID
Task ID
logging
Examples
This example shows how to increase the logging events buffer size to 50000 bytes:
RP/0/0/CPU0:router(config)# logging events buffer-size 50000
OL-24735-01
The size, in bytes, of the logging events buffer. Range is 1024 to 1024000 bytes. The
default is 43200 bytes.
show logging events info, on page 62
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
command to confirm the size of the logging events buffer.
Operations
read, write
logging events buffer-size
27
Advertisement
Table of Contents
