Show Logging Onboard - Cisco XR 1200 series Command Reference Manual

show logging onboard

show logging onboard
To display the onboard failure logging (OBFL) messages, use the show logging onboard command in
administration EXEC or mode.
show logging onboard [all| cbc {dump-all| dump-range {start-address| end-address}| most-recent {fans
fan-tray-slot| [location node-id]}| diagnostic| environment| error| temperature| uptime| voltage}] [all|
continuous| historical| static-data] [detail| raw| summary] [location node-id] [verbose]
Syntax Description
all
cbc
dump-all
dump-range {start-address |
end-address}
most-recent
fans fan-tray-slot
location node-id
diagnostic
environment
error
temperature
uptime
voltage
continuous
historical
static-data
detail
raw
summary
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
358
Displays all file information.
Displays Can Bus Controller (CBC) OBFL commands.
Displays all OBFL records.
Displays OBFL EEPROM data for a given range. Start and end address
ranges are from 0 to 4294967295.
Displays the last five OBFL data records.
Displays a specific fan tray slot.
Displays OBFL messages from the designated node. The node-id
argument is entered in the rack/slot/module notation.
Displays diagnostic information.
Displays system environment information.
Displays output from the message application.
Displays temperature information.
Displays the OBFL uptime.
Displays voltage information.
Displays continuous information.
Displays historical information.
Display system descriptor data.
Displays detailed logging information.
Displays raw OBFL data.
Displays a summary of OBFL logging information.
Onboard Failure Logging Commands
OL-24735-01