Recurring - Cisco XR 1200 series Command Reference Manual

recurring

recurring
To indicate that the operation starts automatically at the specified time and for the specified duration every
day, use the recurring command in IP SLA schedule configuration mode. To not start the operation everyday,
use the no form of this command.
recurring
no recurring
Syntax Description
This command has no keywords or arguments.
Command Default
Recurring is disabled.
Command Modes
IP SLA schedule configuration
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
monitor
Examples The following example shows how to use the recurring command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)# recurring
Related Commands
Command
operation, on page 174
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
204
IP Service Level Agreement Commands
Modification
This command was introduced.
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
OL-24735-01