Table of Contents
Advertisement
Alarm Management and Logging Correlation Commands
logging events threshold
To specify the logging events buffer threshold that, when surpassed, generates an alarm, use the logging
events threshold command in global configuration mode. To return to the default value, use the no form of
this command.
logging events threshold percent
no logging events threshold
Syntax Description
percent
Command Default
percent: 80 percent
Command Modes
Global configuration
Command History
Release
Release 3.2
Usage Guidelines
This command can be configured to generate an alarm when 10 percent or more of the event buffer capacity
is available.
The logging events buffer is circular; that is, when full it overwrites the oldest messages in the buffer. Once
the logging events buffer reaches full capacity, the next threshold alarm is generated when the number of
overwritten events surpasses the percentage of buffer capacity allocated to messages.
Use the
Task ID
Task ID
logging
Examples
This example shows how to configure the threshold setting to 95 percent of buffer capacity:
RP/0/0/CPU0:router(config)# logging events threshold 95
OL-24735-01
Minimum percentage of buffer capacity that must be allocated to messages before an
alarm is generated. Range is 10 to 100. The default is 80 percent.
show logging events info, on page 62
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
command to display the current threshold setting.
Operations
read, write
logging events threshold
33
Advertisement
Table of Contents
