Table of Contents
Advertisement
Onboard Failure Logging Commands
Command History
Release
Release 3.4.1
Usage Guidelines
Use the clear logging onboard command to clear OBFL messages from all nodes. Use the clear logging
onboard command with the location node-id keyword and argument to clear OBFL messages for a specific
node. If the specified node is not present, an error message is displayed.
Caution
The clear logging onboard command permanently deletes all OBFL data for a node or for all nodes. Do
not clear the OBFL logs without specific reasons, because the OBFL data is used to diagnose and resolve
problems in FRUs.
If OBFL is actively running on a card, issuing the clear logging onboard command can result in a corrupt
Caution
or incomplete log at a later point in time. OBFL should always be disabled before this command is issued.
Task ID
Task ID
logging
Examples
In the following example, the OBFL data is cleared for all nodes in the system:
RP/0/0/CPU0:router(admin)# clear logging onboard
Related Commands
Command
hw-module logging onboard , on page 356
show logging onboard, on page 358
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Operations
read
Description
Enables or disables OBFL.
Displays the OBFL messages.
clear logging onboard
355
Advertisement
Table of Contents
