Schedule Operation - Cisco XR 1200 series Command Reference Manual

IP Service Level Agreement Commands

schedule operation

To enter schedule configuration mode, use the schedule operation command in IP SLA configuration mode.
To remove the scheduler, use the no form of this command.
schedule operation operation-number
no schedule operation operation-number
Syntax Description
operation-number
Command Default
None
Command Modes
IP SLA configuration
Command History
Release
Release 3.3.0
Usage Guidelines
The schedule operation command enters the IP SLA schedule configuration mode. You can configure more
schedule configuration parameters to schedule the operation. When an operation is scheduled, it continues
collecting information until the configured life expires.
Task ID
Task ID
monitor
Examples The following example shows how to use the ipsla schedule operation command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)#
OL-24735-01
Configuration number or schedule number that is used to schedule an IP
SLA operation. Range is 1 to 2048.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Operations
read, write
schedule operation
215