Cisco XR 1200 series Command Reference Manual page 308

vrf (IP SLA)
• IP SLA ICMP path-jitter
• IP SLA UDP echo
• IP SLA UDP jitter
• IP SLA MPLS LSP ping
• IP SLA MPLS LSP trace
Task ID
Task ID
monitor
Examples The following example shows how to use the vrf command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp echo
RP/0/0/CPU0:router(config-ipsla-udp-echo)# vrf vpn2
Related Commands
Command
operation, on page 174
schedule operation, on page 215
type icmp echo, on page 283
type icmp path-echo, on page 284
type icmp path-jitter, on page 285
type udp echo, on page 290
type udp jitter, on page 291
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
296
IP Service Level Agreement Commands
Operations
read, write
Description
Configures an IP SLA operation.
Schedules an IP SLA operation.
Configures an IP SLA ICMP echo operation.
Configures an IP SLA ICMP path-echo operation.
Configures an IP SLA ICMP path-jitter operation.
Configures an IP SLA UDP echo operation.
Configures an IP SLA UDP jitter operation.
OL-24735-01