Cisco XR 1200 series Command Reference Manual page 260

show ipsla statistics enhanced aggregated
Number of Failed Operations due to a Timeout
Number of Failed Operations due to a Busy
Number of Failed Operations due to a No Connection
Number of Failed Operations due to an Internal Error: 0
Number of Failed Operations due to a Sequence Error : 0
Number of Failed Operations due to a Verify Error
RTT Values:
RTTAvg
NumOfRTT: 5
Bucket : 2
Start Time Index: 00:43:12.747 UTC Thu Mar 16 2006
Number of Failed Operations due to a Disconnect
Number of Failed Operations due to a Timeout
Number of Failed Operations due to a Busy
Number of Failed Operations due to a No Connection
Number of Failed Operations due to an Internal Error: 0
Number of Failed Operations due to a Sequence Error : 0
Number of Failed Operations due to a Verify Error
RTT Values:
RTTAvg
NumOfRTT: 1
This table describes the significant fields shown in the display.
Table 27: show ipsla statistics enhanced aggregated Field Descriptions
Field
Entry Number
Interval
Bucket
Start Time Index
RTT Values
RTT Min/Avg/Max
NumOfRTT
RTT Sum
RTT Sum2
Number of Failed Operations due to a Disconnect
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
248
: 2 RTTMin: 2
RTTSum: 13
(300 - 600 seconds)
: 2 RTTMin: 2
RTTSum: 2
IP Service Level Agreement Commands
: 0
: 0
: 0
: 0
RTTMax : 5
RTTSum2: 41
: 0
: 0
: 0
: 0
: 0
RTTMax : 2
RTTSum2: 4
Description
Entry number.
Multiple of the frequency of the operation. The
Enhanced interval field defines the interval in which
statistics displayed by the show ipsla statistics
enhanced aggregated command are aggregated. This
field must be configured so that the enhanced
aggregated statistics are displayed.
Bucket index.
Statistics that are aggregated depend on the interval
configuration mode. The value depends on the interval
configuration that is displayed.
Round-trip time statistics appear on the specified
lines.
Maximum values of the RTT that are observed in the
latest cycle (*).
Number of successful round trips.
Sum of all successful round-trip values, in
milliseconds.
Sum of squares of the round-trip values, in
milliseconds.
Number of failed operations due to a disconnect.
OL-24735-01