Clear Logging Onboard - Cisco XR 1200 series Command Reference Manual

clear logging onboard

clear logging onboard
To clear OBFL logging messages from a node or from all nodes, use the clear logging onboard command
in administration EXEC mode.
clear logging onboard [all| cbc {obfl {fans fan-tray-slot| [location node-id]}| corrupted-files| diagnostic|
environment| error| poweron-time| temperature| uptime| voltage}] [location node-id]
Syntax Description
all
cbc
obfl
fans fan-tray-slot
location node-id
corrupted-files
diagnostic
environment
error
poweron-time
temperature
uptime
voltage
continuous
historical
Command Default
All OBFL logging messages are cleared from all nodes.
Command Modes
Administration EXEC
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
354
Clears all OBFL logs.
Clears commands for Can Bus Controller (CBC).
Clears OBFL EEPROM.
Clears a specific fan tray slot.
(Optional) Clears OBFL messages from the designated node. The
node-id argument is entered in the rack/slot/module notation.
Clears corrupted file information.
Clears the online diagnostics information from the OBFL logs.
Clears the environmental information from the OBFL logs.
Clear syslog information.
Clears time of first customer power on.
Clears temperature information.
Clears uptime information.
Clears voltage information.
Clears continuous information.
Clears historical information.
Onboard Failure Logging Commands
OL-24735-01