Cisco XR 1200 series Command Reference Manual page 253

IP Service Level Agreement Commands
Field
MinOfNegativesSD
MinOfPositivesSD
MinOfNegativesDS
NumOfOW
NumOfNegativesDS
NumOfNegativesSD
NumOfPositivesDS
NumOfPositivesSD
NumOfRTT
One Way Values
OWMaxDS
OWMaxSD
OWMinDS
OWMinSD
OWSumDS
OWSumSD
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
show ipsla statistics aggregated
Description
Minimum negative jitter values from the source to
the destination. The absolute value is given.
Minimum jitter values from the source to the
destination in milliseconds.
Minimum negative jitter values from the destination
to the source. The absolute value is given.
Number of successful one-way time measurements.
Number of jitter values from the destination to the
source that are negative; for example, network latency
decreases for two consecutive test packets.
Number of jitter values from the source to the
destination that are negative; for example, network
latency decreases for two consecutive test packets.
Number of jitter values from the destination to the
source that are positive; for example, network latency
increases for two consecutive test packets.
Number of jitter values from the source to the
destination that are positive; for example, network
latency increases for two consecutive test packets.
Number of successful round trips.
One-way measurement statistics appear on the
specified lines. One Way (OW) values are the amount
of time that it took the packet to travel from the source
router to the target router or from the target router to
the source router.
Maximum time from the destination to the source.
Maximum time from the source to the destination.
Minimum time from the destination to the source.
Minimum time from the source to the destination.
Sum of one-way delay values from the destination to
the source.
Sum of one-way delay values from the source to the
destination.
241