Upgrading To Cisco Ios Xr Software Release 4.0.X(Px) Before Migrating To Cisco Crs-3 Hardware - Cisco CRS-1 - Carrier Routing System Router Migration Manual

Upgrading to Cisco IOS XR Software Release 4.0.X(PX) Before Migrating to Cisco CRS-3 Hardware

Step 5 Verify Mgmt access to the router
Note
Upgrading to Cisco IOS XR Software Release 4.0.X(PX) Before
Migrating to Cisco CRS-3 Hardware
Before migrating your CRS-1 hardware to CRS-3 hardware you must complete the software upgrade to
Cisco IOS XR software Release 4.0.X(PX).
Note All install operations should be done while logged into admin mode.
Step 1 Add the required PIEs to disk:
The
rcp:
The above step must be repeated for each PIE file, or all of the PIEs can be added together in a single
install add command. To add all PIEs using a single command, list all of the PIEs (including their
source) within the install add command in the following manner:
Note
The
command:
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
1-14
router(admin)#copy running-config tftp://...admin-running_config.txt
router(admin)#exit
Cisco recommends copying all the Mandatory PIE files, Optional PIE files, and Recommended
SMUs to the hard disk as part of pre-maintenance activity. This will save significant time during
the upgrade process.
router(admin)# install add tar <source>/<path>/<pie> sync
keyword can be one of
<source>
.
router(admin)# install add <source>/hfr-mini-px.pie-<version>
<source>/hfr-mcast-px.pie-<version> <source>/hfr-mgbl-px.pie-<version>
<source>/hfr-mpls-px.pie-<version> <source>/hfr-k9sec-px.pie-<version>
<source>/hfr-diags-px.pie-<version> hfr-upgrade-px.pie
The use of the sync option prevents other users from executing any other command during the
install operation.
keyword can be specified just once rather than for each package. This simplifies the
<source>
router(admin)# install add <source> hfr-mini-px.pie-<version>
hfr-mcast-px.pie-<version> hfr-mgbl-px.pie-<version> hfr-mpls-px.pie-<version>
hfr-k9sec-px.pie-<version> hfr-diags-px.pie-<version> hfr-upgrade-px.pie <version>
sync
Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
, ,
disk0: disk1: compactflash:
, , ,
harddisk: tftp: ftp:
sync
OL-13669-03
or