Table of Contents
Advertisement
Embedded Event Manager Commands
show event manager statistics-table
To display the currently supported statistic counters maintained by the Statistic Event Detector, use the show
event manager statistics-table command in EXEC mode.
show event manager statistics-table {stats-name| all}
Syntax Description
stats-name
all
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.2
Release 3.6.0
Release 3.7.0
Usage Guidelines
Use the show event manager statistics-table all command to display the output for all the statistics types.
Task ID
Task ID
eem
OL-24735-01
Specific statistics type to be displayed. There are three statistics types:
• generic (ifstats-generic)
• interface table (ifstats-iftable)
• data rate (ifstats-datarate)
Displays the possible values for the stats-name argument.
Displays the output for all the statistics types.
Modification
This command was introduced.
The show fault manager statistics-table command was replaced with
the show event manager statistics-table command.
Task ID was changed from fault-mgr to eem.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
show event manager statistics-table
Operations
read
107
Advertisement
Table of Contents
