Timeout-Rootcause - Cisco XR 1200 series Command Reference Manual

timeout-rootcause

timeout-rootcause
To specify an optional parameter for an applied correlation rule, use the timeout-rootcause command in
stateful or nonstateful correlation rule configuration modes. To remove the timeout period, use the no form
of this command.
timeout-rootcause [ milliseconds ]
no timeout-rootcause
Syntax Description
milliseconds
Command Default
Root-cause alarm timeout period is not specified.
Command Modes
Stateful correlation rule configuration
Nonstateful correlation rule configuration
Command History
Release
Release 3.6.0
Usage Guidelines
When a root-cause timeout is configured and a non-root-cause message is received first, the following occurs:
• When a root-cause timeout is configured and a non-root-cause message is received first, the following
• When the root-cause message is not received before the root-cause timeout expires, then all the
Task ID
Task ID
logging
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
74
occurs:
When the root-cause message arrives before the root-cause timeout expires, then the correlation continues
as normal using the remainder of the main rule timeout.
non-root-cause messages held during the root-cause timeout period are sent to syslog and the correlation
is terminated.
Alarm Management and Logging Correlation Commands
Range is 1 to 600000 milliseconds.
Modification
This command was introduced.
Operations
read, write
OL-24735-01