Cisco XR 1200 series Command Reference Manual page 299

IP Service Level Agreement Commands
monitored provider edge (PE) routers. This configuration is inherited by all LSP operations that are created
automatically.
Task ID
Task ID
monitor
Examples
The following example shows how to use the type mpls lsp ping command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mpls-lsp-ping)#
The following example shows how to use the type mpls lsp ping command in IP SLA MPLS LSP monitor
configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# monitor 2
RP/0/0/CPU0:router(config-ipsla-mplslm-def)# type mpls lsp ping
RP/0/0/CPU0:router(config-ipsla-mplslm-lsp-ping)#
Related Commands
Command
monitor, on page 168
mpls lsp-monitor, on page 172
operation, on page 174
schedule monitor, on page 213
schedule operation, on page 215
type mpls lsp trace, on page 288
OL-24735-01
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Operations
read, write
Description
Configures an IP SLA MPLS LSP monitor instance.
Configures MPLS label switched path (LSP)
monitoring.
Configures an IP SLA operation.
Schedules an IP SLA MPLS LSP monitoring instance.
Schedules an IP SLA operation.
Traces the hop-by-hop route of an LSP path in an
MPLS VPN.
type mpls lsp ping
287