Table of Contents
Advertisement
threshold type average
The following example shows how to set the number of probes for the react command with the packet-loss
keyword for the threshold type average command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react packet-loss dest-to-source
RP/0/0/CPU0:router(config-ipsla-react-cond)# threshold type average 8
Related Commands
Command
action (IP SLA), on page 117
operation, on page 174
schedule operation, on page 215
reaction operation, on page 199
react, on page 192
threshold, on page 267
threshold type consecutive, on page 271
threshold type immediate, on page 273
threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
270
IP Service Level Agreement Commands
Description
Specifies what action or combination of actions the
operation performs.
Configures an IP SLA operation.
Schedules an IP SLA operation.
Configures certain actions that are based on events
under the control of the IP SLA agent.
Specifies an element to be monitored for a reaction.
Sets the lower-limit and upper-limit values.
Takes action after a number of consecutive violations.
Takes action immediately upon a threshold violation.
Takes action upon X violations in Y probe operations.
OL-24735-01
Advertisement
Table of Contents
