Monitor Interface - Cisco XR 1200 series Command Reference Manual

monitor interface

monitor interface
To monitor interface counters in real time, use the monitor interface command in EXEC or administration
EXEC mode.
monitor interface [type1 interface-path-id1 [...[type32 interface-path-id32]]]
Syntax Description
type
interface-path-id
Command Default
Use the monitor interface command without an argument to display statistics for all interfaces in the system.
Command Modes
EXEC
Administration EXEC
Command History
Release
Release 3.2
Release 3.3.0
Release 3.7.0
Usage Guidelines
Use the monitor interface command without any keywords or arguments to display interface counters for
all interfaces. The display refreshes every 2 seconds.
Use the monitor interface command with the type interface-path-id arguments to display counters for a
single interface. For example: monitor interface pos0/2/0/0
To display more than one selected interface, enter the monitor interface command with multiple type
interface-path-id arguments. For example: monitor interface pos0/2/0/0 pos0/5/0/1 pos0/5/0/2
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
366
Interface type. For more information, use the question mark ( ? ) online help function.
Physical interface or virtual interface.
Note Use the show interfaces command to see a list of all interfaces currently
configured on the router.
For more information about the syntax for the router, use the question mark ( ? )
online help function.
Modification
This command was introduced.
Support was added for multiple interfaces.
Support was added for default behavior to monitor all interfaces.
Support was added for wildcards in the interface syntax.
Support was added for additional display options.
Added summary enhancements for the AF aggregates.
Performance Management Commands
OL-24735-01