Table of Contents
Advertisement
start-time
Usage Guidelines
If the start-time command is used in IP SLA operation mode, it configures the start time for the specific
operation being configured. If the start-time command is used in IP SLA MPLS LSP monitor mode, it
configures the start time for all monitor instances associated with the monitored provider edge (PE) routers.
Task ID
Task ID
monitor
Examples
The following example shows how to use the start-time command option for the schedule operation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)# start-time after 01:00:00
The following example shows how to use the start-time command in IP SLA MPLS LSP monitor schedule
configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# schedule monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-sched)# start-time after 01:00:00
The following example shows how to use the start-time command and specify a year for a scheduled operation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla operation 2
RP/0/0/CPU0:router(config-ipsla-op)# type icmp echo
RP/0/0/CPU0:router(config-ipsla-icmp-echo)# destination address 192.0.2.9
RP/0/0/CPU0:router(config-ipsla-icmp-echo)# exit
RP/0/0/CPU0:router(config-ipsla-op)# exit
RP/0/0/CPU0:router(config-ipsla)# schedule operation 2
RP/0/0/CPU0:router(config-ipsla-sched)# start 20:0:0 february 7 2008
RP/0/0/CPU0:router(config-ipsla-sched)#
Related Commands
Command
life, on page 154
operation, on page 174
recurring, on page 204
schedule monitor, on page 213
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
254
IP Service Level Agreement Commands
Operations
read, write
Description
Specifies the length of time to execute.
Configures an IP SLA operation.
Indicates that the operation starts automatically at the
specified time and for the specified duration every
day.
Schedules an IP SLA MPLS LSP monitoring instance.
Schedules an IP SLA operation.
OL-24735-01
Advertisement
Table of Contents
