History - Cisco XR 1200 series Command Reference Manual

history

history
To configure the history parameters for the IP SLA operation, use the history command in the appropriate
configuration mode. To use the default value, use the no form of this command.
history [buckets buckets| filter {all| failures}| lives lives]
no history
Syntax Description
buckets
buckets
filter
all
failures
lives
lives
Command Default
None
Command Modes
IP SLA UDP echo configuration
IP SLA UDP jitter configuration
IP SLA ICMP path-jitter configuration
IP SLA ICMP path-echo configuration
IP SLA ICMP echo configuration
IP SLA MPLS LSP ping configuration
IP SLA MPLS LSP trace configuration
Command History
Release
Release 3.3.0
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
146
Sets the number of history buckets that are kept during the lifetime of the IP SLA
operation.
Number of history buckets that are kept during the lifetime of an IP SLA operation.
Range is 1 to 60.
Defines the type of information that is kept in the history table for the IP SLA
operation.
Stores history data for all operations, if set.
Stores data for operations that failed, if set.
Sets the number of lives that are maintained in the history table for an IP SLA
operation.
Number of lives that are maintained in the history table for an IP SLA operation.
Range is 0 to 2.
Modification
This command was introduced.
IP Service Level Agreement Commands
OL-24735-01