Ageout - Cisco XR 1200 series Command Reference Manual

IP Service Level Agreement Commands

ageout

To specify the number of seconds to keep the operation in memory when it is not actively collecting information,
use the ageout command in IP SLA schedule configuration mode. To use the default value so that the operation
will never age out, use the no form of this command.
ageout seconds
no ageout
Syntax Description
seconds
Command Default
The default value is 0 seconds (never aged out).
Command Modes
IP SLA schedule configuration
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
monitor
Examples The following example shows how to use the ageout command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)# ageout 3600
Related Commands
Command
operation, on page 174
OL-24735-01
Age-out interval in seconds. The value 0 seconds means that the collected data is
not aged out. Range is 0 to 2073600.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
Modification
This command was introduced.
Operations
read, write
Description
Configures an IP SLA operation.
ageout
119