Table of Contents
Advertisement
Alarm Management and Logging Correlation Commands
show logging correlator buffer
To display messages in the logging correlator buffer, use the show logging correlator buffer command in
EXEC mode.
show logging correlator buffer {all-in-buffer [ruletype [nonstateful| stateful]]| [rulesource [internal|
user]]| rule-name correlation-rule1 ... correlation-rule14| correlationID correlation-id1 .. correlation-id14}
Syntax Description
all-in-buffer
ruletype
nonstateful
stateful
rulesource
internal
user
rule-name
correlation-rule1...correlation-rule14
correlationID
correlation-id1..correlation-id14
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.2
OL-24735-01
Displays all messages in the correlation buffer.
(Optional) Displays the ruletype filter.
(Optional) Displays the nonstateful rules.
(Optional) Displays the stateful rules.
(Optional) Displays the rulesource filter.
(Optional) Displays the internally defined rules from the rulesource
filter.
(Optional) Displays the user-defined rules from the rulesource filter.
Displays a messages associated with a correlation rule name. Up to
14 correlation rules can be specified, separated by a space.
Displays a message identified by correlation ID. Up to 14 correlation
IDs can be specified, separated by a space. Range is 0 to 4294967294.
Modification
This command was introduced.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
show logging correlator buffer
47
Advertisement
Table of Contents
