Cisco XR 1200 series Command Reference Manual page 384

performance-mgmt apply monitor
node-id
node-id process-id
process-name
template-name
default
Command Default
Monitoring is disabled.
Command Modes
Global configuration
Command History
Release
Release 2.0
Release 3.2
Release 3.3.0
Release 4.0.1
Usage Guidelines
Use the performance-mgmt apply monitor command to apply a statistics template and enable monitoring.
This command captures one cycle of a sample to analyze an instance of an entity. Rather than collect statistics
for all instances, which is the purpose of the performance-mgmt apply statistics command, the
performance-mgmt apply monitor command captures statistics for a specific entity instance for one sampling
period.
The type and interface-path-id arguments are only to be used with the interface data-rates or interface
generic-counter keyword.
For information about creating templates, see the
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
372
Designated node. Used with the node cpu or node memory keyword. The node-id
argument is entered in the rack/slot/module notation.
Designated node and process ID. Used with the node process keyword. The node-id
argument is entered in the rack/slot/module notation.
Process name of the OSPF instance. Used with the ospfv2protocol and ospfv3protocol
keywords.
Name of a predefined template used for statistics collection. A template name can be
any combination of alphanumeric characters, and may include the underscore character
(_). Use the show running performance-mgmt command to display a list of available
templates.
Applies the default template.
Modification
This command was introduced.
The enable keyword was replaced by the apply keyword. In previous releases,
this command was referred to as performance-mgmt enable monitor .
The disable keyword was deprecated.
The ospf v2protocol and ospf v3protocol keywords were introduced to
support the monitoring of OSPF entity instances.
Removed support for MPLS interfaces.
The interface basic-counters keyword was added to support the monitoring
of basic counters on the interface.
Performance Management Commands
performance-mgmt apply statistics, on page 374 command.
OL-24735-01