Logging Buffered - Cisco XR 1200 series Command Reference Manual

logging buffered

logging buffered
To specify the logging buffer as a destination for system logging (syslog) messages, use the logging buffered
command in global configuration mode. To remove the logging buffered command from the configuration
file and cancel the use of the buffer, use the no form of this command.
logging buffered {size| severity}
no logging buffered {size| severity}
Syntax Description
size
severity
Command Default
size: 307200 bytes
severity: debugging
Command Modes
Global configuration
Command History
Release
Release 3.2
Release 4.0.0
Usage Guidelines
Use the logging buffered command to copy messages to the logging buffer. The logging buffer is circular,
so newer messages overwrite older messages after the buffer is filled. This command is related to the show
logging buffer command, which means that when you execute a logging buffered warnings command, it
enables the logging for all the levels below the configured level, including log for LOG_ERR, LOG_CRIT,
LOG_ALERT, LOG_EMERG, and LOG_WARNING messages. Use the logging buffer size to change the
size of the buffer.
The value specified for the severity argument causes messages at that level and at numerically lower levels
to be displayed on the console terminal. See
the possible severity level keywords for the severity argument.
This table describes the acceptable severity levels for the severity argument.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
312
Size of the buffer, in bytes. Range is 307200 to 125000000 bytes. The default is 307200
bytes.
Severity level of messages that display on the console. Possible severity levels and their
respective system conditions are listed under
312in the "Usage Guidelines" section. The default is debugging.
page
Modification
This command was introduced.
The value of size argument is changed from 4096 to 307200.
Table 29: Severity Levels for Messages, on page
Logging Services Commands
Table 29: Severity Levels for Messages, on
312for a list of
OL-24735-01