Ars Mode - Panasonic KX-TDA50 Programming Manual

For KX-TDA600:
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.12.6 [6-6] Tenant
Programming Manual References
2.8.3 [2-2] Operator & BGM
Feature Manual References
1.12.5 Operator Features
1.17.3 Tenant Service

ARS Mode

Specifies the ARS mode used when making a CO line call.
Default
Same as System Setting
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle
Line Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO
Line Access method.
Same as System Setting: The setting specified in ARS Mode in 2.14.1 [8-1] System Settings is
applied.
Maintenance Console Location
2.12.6 [6-6] Tenant
Programming Manual References
2.14.1 [8-1] System Settings
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.17.3 Tenant Service
System Speed Dial
Specifies which system speed dialing table is used by the tenant. This setting is only available when
an MEC (KX-TDA50/KX-TDA100/KX-TDA200) or EMEC (KX-TDA600) card is installed.
Default
Same as System Setting
2.12 [6] Feature
PC Programming Manual 567