Ring Tone Pattern Selection - Panasonic KX-TDA100D Features Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100D:
Table of Contents

Advertisement

1.1.3.2 Ring Tone Pattern Selection

Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
1 280 ms*
Single
Double
Triple
S-Double
* The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorised into three parts, each containing a specified number of pattern plans.
The ring tone pattern table is categorised as follows:
Incoming Trunk Calls: each pattern plan can assign a ring tone pattern for each trunk group.
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/
No.
Hold
Recall
1
Double
2
Single
:
:
Conditions
"PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
Trunk Call/Hold
Recall
TRG
TRG1
...
2
Single
Double
:
:
:
Doorphone Call
Reminder
Port
Port 1
...
2
Single
Double
:
:
:
1.1.3 Incoming Call Indication Features
Timed
Call
LCS
Back
:
:
Feature Guide
External
Sensor
:
:
35

Advertisement

Table of Contents
loading

Table of Contents