Operation On Atc Operation Panel; Status Indication And Operation Keys - Okuma OSP-U100M Operation Manual

4203- E P-60
SECTION
3 MANUAL OPERATION FUNCTIONS
4-1-2.
Operation on ATC Operation Panel
(1) Status indication and operation keys
This indicates that the display screen displays the ATC status.
I
AUTO
OPERATION
x"
97/07/15 14:10:00
ATC/APC *ATC DATA*
I ACTIVE NEXT
ACT.POS. SEQ.N0.
ATC
001
002
001 001
ATC operation sequence
number
_
RUN
Pot number presently selected
in the
magazine
_
Next tool number
Tool number currently set in
the spindle
_
PR( (SRAM ACTUAL PART BLOCK
LECT
POSIT. PROGRAM DATA
SEARCH
I
ATC/APC
I
DATA
I
[EXTEND]
CHECK
This
tiled displays "READY',
"RUN", depending on the
operation status.
ATC OPERATION
Releases
interlock.
INTER
LOCK"""
RELEASE
APC
Operations for ATC
are
selected.
_
[7
jÿRT,
/
Reverses one
step at
a time.
Advances one step at a time.
Executes tool RETURN CYCLE.
Executes one cycle.
Fig. 3-1 ATC
Operation
Using Flat Panel
(a) ATC/APC display
In the
automatic,
MDI or manual mode, press
function key [F6] (ATC/APC)
to
display the ATC/APC
screen.
(b)
Selection of ATC operation
Press the ATC key at the ATC OPERATION panel. Whether the ATC operation is selected can be
checked by the display screen display
-
*ATC DATA*.