Data Set Commands; Set Command; Add Command - Okuma OSP-U100M Operation Manual

4203-E P-161
SECTION
1
DATA SETTING
3.
Data Set Commands
The data set commands are detailed in the following pages, and may be classified
into three
groups:
commands for data setting, commands for parameter selection, and input/output commands for
peripherals.
3-1
.
Commands for Data Setting
This group consists of three commands:
SET, ADD, and CAL
3-1-1.
SET Command
=S
CAL
SEARCH
ITEM
t
ITEM; [EXTEND
]y
SET ADD
F1
] [
F2
] [
F3
] F4
]
F5
[
F6
1 [
F7
1 [
F8
Press
[F1] (SET)
"S'1 is displayed.
The data entered itself is a command serving as new data. The SET command is effective when function
key [F1] is pressed, and
displays "S" on the
21st line on the display screen.
Enter the data from the keyboard and press the WRITE key, then the keyed
in
data
is input.
3-1-2. ADD Command
=AD
ITEM
T ITEM; [EXTEND]
J
ADD
CAL
SEARCH
/SET
F1
1 |
F2
[
F3
1
F4
F5
[
F6
1
F7
F8
Press
[F2] (ADD)
"AD" is displayed.
The data entered is added
to
the current data
to
form a command serving as new data.
The ADD command is effective when function key [F2] is pressed, providing a display of "AD" on the
21 st
line on the display screen.
Enter the data from the keyboard and press the WRITE key, and the entered data is added to the current
data. The result of addition is input as the new data.