Output Format - Okuma OSP-U100M Operation Manual

4203-E P-338
SECTION
3
DATA
INPUT/OUTPUT
OPERATION
3-3-2.
Output Format
(1) ISO Code
C L C L -•s*
$File
name
O Program nam<
R F R F
Feed holes Part program
Feed holes File name Feed holes
to
(a) (b> (c) M) (e)
Fig. 3-5 Output Format (ISO Code)
(2) EIA Code
£
SFile name
0 Program name
R
Feed holes
File name
Feed holes
Part program
Feed holes
(b) (c) M> (a)
«
(e)
Fig. 3-6 Output Format (EIA Code) (1)
(a) 600 tape feed holes are punched in the tape leader section.
The number of feed holes to be punched out
can range, as needed, from
1 to
10000 with a
parameter.
For details, consult III, "PARAMETERS".
(b)
The file name
is punched out following the "$"
code. (Program data is punched
out
in the ISO
coding system.)
(c) 50 tape feed
holes are punched out.
The number of the tape feed holes cannot be changed.
(d) Either of the following is punched out.
%, CR, and LF
ER and EOB
(e) The part
program data is punched out following the program name
(number).
(f) The same number of tape feed holes as in a) are punched out in the tape trailing section.