Library Program Directory Display; Deleting Library Program - Okuma OSP-U100M Operation Manual

4203-E P-110
SECTION 5 AUTOMATIC MODE OPERATION
Operating procedure for library program registration:
(1) Library Program Directory Display
Press function key [F1] (LIBRARY P.SET), key in "LP
L_.
"
and then press the WRITE key.
The screen displays the library program directory and the remaining capacity in the number of
bytes.
I
AUTO
OPERATION
A.MIN 0100
I 97/07/15
14:10:00
LIBRARY PROGRAM
Iran
NAME SIZE
0100 86
0100 10
FREE
1904
=LP
=LP 01 00. A. SUB
=LP
TOOL PER-
DIAG-
Dl SPLAY
|
S0NAL NOSIS
Lll
[EXTEND]
J
MESSAGE P.SET
©©©©©©©©
Fig.
5-12
Library Program Directory Display
When library program directory is displayed on two pages, use the BS or WRITE key
to change
the
display screen.
(2) Library Program Registration
Press function key [F1] (LIBRARY P.SET) and key in program name and file name as follows:
LP
i
—
1
program name, file name [WRITE]
The library program can now be registered.
When a
file name is omitted, subprograms in all the SSB files are registered when the entered
program name
is
"O****".
When a program name is omitted,
all
the subprograms in the file specified following the comma (,)
are registered as library programs.
Up to 65 subprograms can be registered.
Note that a main program
cannot
be registered as a library program.
(3) Deleting Library Program
Press
function
key [F1] (LIBRARY P.SET) and key in the program name as follows:
LP
L_I
program name;C [WRITE]
With the operation above,
the programs registered as library programs
are
deleted.