Nc Status Indicating Lamps - Okuma OSP-U100M Operation Manual

4203-E P-38
SECTION
1 OPERATION
2-3. NC Status Indicating lamps
(1)
RUN Lamp
The RUN indicating lamp are lit while the NC is processing data.
(2) S.T.M Lamp
The S.T.M. indicating lamp are lit while an S (spindle), T (tool), or M
(miscellaneous) command is executed.
(3)
SLIDE HOLD Lamp
The SLIDE HOLD indicating lamp lights when the [SLIDE HOLD] button
on the machine operation panel is pressed.
(4) PROGRAM STOP Lamp
The PROGRAM STOP indicating lamp is lit while the
operation is
suspended in the program
stop
or optional
stop state.
The indicating lamp blinks while
a
dwell function is executed.
(5) LIMIT Lamp
The LIMIT indicating lamp is lit if an axis is
at
the variable limit position.
(6)
ALARM Lamp
The ALARM indicating lamp lights at the occurrence of an
alarm.
The lamp does
not
light if
a
warning
message
is displayed on
the screen
for operator's errors.
RUN
S.T.M
SLIDE
HOLD
PROGRAM
STOP
LIMIT
ALARM