One Line Erasing - Okuma OSP-U100M Operation Manual

4203-E P-228
SECTION 2 PROGRAM OPERATION
5-8. One Line Erasing
(1) This function erases program data in the edit line (»). The blank line remains.
Press function key [F6] (LINE ERASE) to erase program data in the edit line. When data is erased,
a blank line will remain.
(2) The edit pointer is placed at the first character of the erased edit line.
(3) The prompt ">ER" will be displayed on the command line.
(4) One line deletion operation at the line which has
more than 63 characters differs from ordinary
one line deletion processing. (See the figure.)
GOO N101
X800
X250
Z200
N102
»
&Z200
N103
N104
G01 Z150
F0.3
X300
T
>ER
CHAR.
CHAR.
INSERT DELETE
DELETE
LINE LINE LINE EDIT
[EXTEND]/ INSERT DELETE
ERASE QUIT
Press [F6] (LINE ERASE)
1
N101 GOO X800 Z200
N103
N104
G01 Z150 F0.3
X300
(5)
This function is effective
when replacing entire program data in a block with new program data.