Initializing - Okuma OSP-U100M Operation Manual

4203-E P-268
SECTION 2 PROGRAM OPERATION
10.
Initializing
This function initializes the
storage
device such as memory and floppy disk. When this function is
activated, all the data
in the storage device will be deleted.
The operating procedure is as indicated below.
(1) Press function key
[F2] (INIT).
"IN" is displayed
on
the console line.
=EX
=
IN
BLANK
TIME
INIT DELETE RENAME
DEFINE
FREE
QUIOE
RUN
[EXTE ND]y
©©©©GDCfDCfD©
"IN" is displayed.
Press [F2] (INIT).
(2)
Enter the device name, MD1 : or FDO:.
The default is MD1:.
(3)
Press the WRITE key.
The indication as shown below will appear
on
the screen, requiring the operator to respond.
=IN
Initialize OK (Y/N) !
=EX
=IN
initialize
OK (Y/N)
!N
BLANK
INIT DELETE RENAME
DEFINE
FREE
QUIDE
RUN
TIME [EXTENDÿ/
(4) To initialize the device, type Y. To abort operation, type N.
(5)
Press the WRITE key.
When "Y" has been typed
and the
WRITE key has been
pressed, the storage device will be
initialized.
When "N" has been typed and the WRITE key has been pressed, initialization will be aborted.