Creating And Editing Commands; Creation Screen - Okuma OSP-U100M Operation Manual

4203-E P-284
SECTION 2 PROGRAM OPERATION
15-2. Creating and Editing Commands
15-2-1. Command Creation Screen
Lines 4 to 7
: The command is created and edited here.
Characters keyed in are entered
at the position of the edit pointer. When
a
character
is entered, the edit pointer moves to the
next
character space.
The downward-pointing arrow "J," indicates the end
of the command. Up
to 255
characters can be entered.
The character string being entered to create a command can be modified by moving
the edit pointer with the cursor keys.
Lines 9 to
1 5 :
The procedure for displaying directories is shown below.To display a directory, press
one of the following function keys:
[FI] (INDEX), [F2] (MD1: INDEX), [F3] (EDO: INDEX)
[F2] MD1: :k. MIN
If the [F2] (MD1: INDEX) key is pressed, the
directory of MD1 related
(machining
files
programs) with an extend name of "MIN"
will
be displayed.
[F3] FDO:
*.
MIN
If the [F3] (FDO: INDEX) key is pressed, the directory of the "FDO" floppy
disk
files (machining programs) with an extend name of "MIN" will be
displayed.
PROGRAM OPERATION TRANSFER
ICOPY.
OVERWRITE
COD
\
Command created
and edited here
\
EDIT POINTER EDIT MODE
INDEX DISPLAY PROCEDURE
[F2] ~>
UDt:*.MIN
[F3] ->
FD0:*.UIN
TO DISPLAY
OTHER
INDEXES. AFTER PRESSING
[Ft],
INPUT
THE DEVICE NAME AND FILE
NAME, THEN PRESS
[WRITE] KEY.
DEFAULT DEVICE NAME = MD1 t
DEFAULT FILE NAME =
•.MIN
FDO:
COMMAf® OVEFWR/ CHAR
INDEX
HISTORY INSERT
DELETE
MDI
:
INDEX
INDEX
CANCEL
Fig.
2-4 Command Creation Screen