Editing Modes; Overwrite Mode - Okuma OSP-U100M Operation Manual

4203-E P-286
SECTION 2 PROGRAM OPERATION
15-2-3. Editing Modes
Lines
4 to 7
of the command creation screen have two editing modes, function key [F5]
(OVERWR/INSERT).
Immediately after displaying the command creation screen, the overwrite mode will be effective.
(1) Overwrite Mode
The overwrite mode is used
to
fix the command displayed in lines 4 to
7
of the command creation
screen in order to overwrite a character or characters in the command.
In the example shown
below, "1" is entered
at
the position of the edit pointer and the edit pointer
moves
to the position of the next character
Note that in this case none of the characters has
moved.
OVERWRITE MODE
COPY ovERwan
CO
REPROGRAM.
MINI
\
EDIT POINTER
1
COPY OVERWRITE
ICO FD1BPR0GRA11.MINI
Fig. 2-6 Editing Modes (Overwrite Mode)
(2) Insert Mode
The
insert mode is used to insert additional characters into
the command displayed in lines 4 to 7 of
the command creation screen.
In the example shown below, the character string to the right of the edit pointer
-
"AM. MIN"
-
moves
to the right to accommodate the character "R" as it
is inserted at the left of the edit pointer.
INSERT MODE
INSERT
Cpav
CO FD0:Pf»6EH.HINl
\
EDIT POINTER
R
INSERT COPY
CO FDO:
PROGRAM.
MIN
i
Fig. 2-7 Editing Modes (Insert Mode)