Indexing Swivel Head (Indexing Attachment) - Okuma OSP-U100M Operation Manual

4203-E P-55
SECTION
3 MANUAL OPERATION FUNCTIONS
3.
Indexing Swivel Head (Indexing Attachment)
The swivel head (attachment) can be indexed to the required position by pressing the swivel head
(attachment) indexing start button after selecting
the required position (FR/RH/RR/LH) by the index
position selecting switch. For the swivel head (attachment) indexing operation, following conditions must
be met.
I
BACK RIGHT
o
PINOLE INDEX
SWIVALHEAD
Conditions for the operation:
(1) Spindle is stopped.
(2) Tool is clamped (both for vertical and horizontal spindles).
(3)
Tool change arm is retracted.
(4) Swivel head in indexable range indicating lamp is illuminated.
(5)
Swivel head index pin is extracted, (only for MCM)
(6) Spindle orientation pin is
not
extracted.
(Swivel head index command includes the orientation pin
extraction.)
(7) Not in alarm A occurrence
(8)
ATC operation sequence number is within
1 to 19, 50 to 66. (only for MCM)
[Supplement] 1
.
In completely automated
operation
including ATC, the swivel head
is
automatically
indexed for automatic tool change operation after Z-axis is moved up to the tool
change position, (only for MCM)
RR position for vertical spindle
FR position for horizontal
spindle
2.
Usually, the swivel head (attachment) is rotated in the clockwise direction. In the
M17 mode, it is rotated in the counterclockwise direction.