Kinds Of Parameters - Okuma OSP-U100M Operation Manual

4203-E P-356
SECTION
1
KINDS OF PARAMETERS
SECTION
1
KINDS OF PARAMETERS
With this model
of NC unit, parameters are classified as indicated below and
special
screens are
prepared
for individual parameter
types
to allow
parameter
setting by directly inputting a numerical value or setting
required data in units of bits, etc.
(1) Display select screen
(selection
for display and not-display of
parameter setting screens)
(2) Common variable
(3) User parameter
(4) G/M
code macro
(5) NC optional parameter (long word)
(6) NC optional parameter (word)
(7)
NC optional
parameter (bit)
(8)
Input unit system
(9) NC optional parameter RS232C (CNO:)
(10) NC optional parameter SPINDLE (OKUMA VAC)
(11) System
parameter
(12) Pitch error
compensation
(13) Machine axis parameter
(14) Machine user
parameter
(15) Machine system parameter
NOTICE : The kinds
of parameters to be used vary depending on the specification.