Verifying Punched Out Programs - Okuma OSP-U100M Operation Manual

4203- E P-197
SECTION 2 PROGRAM OPERATION
4-3.
Verifying Punched Out Programs
This is the function for verifying the program transmitted to a
target
device or medium against the program
stored in the source device between the paper
tape and the floppy, the paper
tape and
the memory, the
floppy and the memory, the floppy and the floppy, the
memory and the memory.
The following explanation is given for the verify
operation
made between the program punched on tape
and the program
stored in memory.
The procedure is as follows:
(1) Set the tape to be verified in the tape reader in the same manner as for storing a
program from
a
tape to memory.
(2) Press function key [F3] (PIP).
The function names on the screen will change to those given in item (3) below.
=PIP
>
MULTI
PIP EDIT PIP
. LIST
CONDENS DATE
[EXTEND]/
DIR
FI
1
F2
] [
F3
1
F4
]
F5 1 F6
] [
F7
] [
F8
Press [F3] (PIP).
"PIP >" is displayed.
(3)
Press function key [F3] (VERIFY).
=PIP
>
FAST
RAST PIP
READ
PUNCH
VERIFY
COPY
FORWARD REWIND QUIT
[EXTENDly
\
Press [F3]
(VERIFY).
The screen changes
to the
directory-selection-based file operation screen and the following is
displayed on the screen.
PIP:VERIFY V
m