Copy, Move, And Extract - Okuma OSP-U100M Operation Manual

4203 -E P-235
SECTION 2 PROGRAM OPERATION
5-1 1
.
Copy, Move, and Extract
These functions are used
to
transfer a group of commands from one program
to
another or to
insert the
same group of commands into several different positions
of a program.
:
N101
N102
N103
S
N121
Copy or move
N122
N123
I
;
Extract buffer
f
N103
Stored
1
N121
.j
i
N215
N216
N103
Extract
Extract
N121
N217
N218
i
:
To
other
areas
Fig. 2-1 Copy, Move, and Extract Functions
Operation sequence:
(1)
Save the group of commands into the extract buffer using the COPY of MOVE command.
(2)
The EXTRACT command will
insert
the commands saved in the extract buffer
into the specified
sequence.